Notes for purchase and use:

•How to choose good glazed tile?
1. Check: manufacturer, address, product name, specification, grade, amount, trademark, date of production, implementing standard. and Certificate of conformity damage proof, and the amount and quality should be consistent to cotents on package.
2. Observe: quality tile characterizes in smooth and delicate glaze, translucent and bright luster ,soft and comfortable matt glaze. Under sufficient natural light or daylight lamp, the tile has no obvious flaw and aberration on glaze observing it 1m away. Patterned tile should be clear without evident flaw. The deviation of good tiles is little. putting some tiles on a flat surface vertically to check evenness and smoothness: putting tile on a flat surface horizontally to observe whether the surface of ceramic tile is warped, measure vertical side surface by the ruler to see whether there are gaps. Thus, if products is flat and not deformed, the construction would be easy, and the surface after faced with tiles looks well.
3. Listening: click the tile, quality ones with high consistency and hardness will react with clear sound.
4. Comparing: For tiles with same specification and thickness, the one have heavy weight and low water absorption indicating good quality. It s also better to compare the brand, quality, price and service in buying.
·Notes for use:
1. Put a cushion at the entrance of commercial sites to keep the brightness of polishing tile longer.
2. Keep the entrance clean. It is better to use dry cotton mop to clean tiles.
3. Keep the tiles clean and clear the smirch on time.
4. Suds added ammonia and turpentine can be used to clean the tiles so that the brightness will be improved.
5. Maintain the polished tiles periodically, Clean tile surface first.

·Notes for tiling:
1. Before tiling, put the tiles vertically with the pattern facing outside and with foam in four angles. No heavy is allowed to put on them.
2. Cement or binder with high adhesiveness should be used.
3. The ground for flooring should be clean, solid and flat.
4. The thickness of the binder should be between 3 and 5 mm. Do not floor on uneven ground .
5. Wet tiling for patterned tiles, prior to adjust base level in peripheral tiling.
6. Using hackle pasting and adjusting to the right thickness, keeping even surface without bubbling .
7. Tiles with pattern can be tiled with general tiles to keep them at the same level.
8. When regulating, use the rubber mallet to click on the center first, then the edge.